|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Cracked heels are one of the most common requests in pedicure work. The Standard 13 mm bit is built exactly for this job: the cone part opens up the crack edges and gives you access to the depth, while the side cylindrical part smooths and reduces the hardened edges. Two movements, one tool.
The head is made from composite abrasive on a medical-grade stainless steel base. The patented manufacturing technology reduces procedure time by 30-50%. Green marking means medium grit, so the bit works precisely without removing too much tissue.
Compatible with chemical liquid disinfection and sterilization.
Important: do not use this bit together with corn-softening products. Always wear protective eyewear during use.
Specifications
- Head diameter: 13 mm
- Shank: 2.35 mm (3/32)
- Bit length: 50-53 mm
- Recommended speed: 17,000 rpm
- Grit: medium (green marking)
- Material: medical-grade stainless steel + composite abrasive
- Sterilization: chemical liquid disinfection
How to use
- Insert the bit into a drill machine with a 2.35 mm chuck.
- Work at up to 17,000 rpm.
- Use the cone part to open the crack edges.
- Use the cylindrical side to smooth the hardened edges.
- After use, disinfect or sterilize with chemical liquid solution.